發(fā)表的論文和論著(Publications)
論文 (1) V. Razdan*,R. Bateman, (2015), Investigation into the use of Smartphone as a Machine vision device for Engineering Metrology and Flaw detection, with focus on Drilling, International Society for Optics and Photonics (SPIE) annual conference, Munich June 22-24, 2015 (accepted). (2) K. Katchasuwanmanee,R. Batemanand K Cheng, (2015), An Integrated Approach to Energy Efficiency in Automotive Manufacturing Systems: Quantitative Analysis and Optimisation, the 13th International Conference on Manufacturing Research (ICMR) 8 - 10 September 2015, University of Bath, UK, (accepted). (3) K. Katchasuwanmanee,R. Batemanand K Cheng, Development of the Energy-smart Production Management System (e-ProMan): a Big Data Driven Approach, Analysis and Optimisation, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 0954405415586711, first published on June 1, 2015. (4) N.Seyajah, K.Cheng &R.Bateman., (2015), An of investigation tools for sustainable design index and its implementation perspective The 25th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) June 23-26 2015, Wolverhampton, UK. (5) N.Seyajah, K.Cheng, &R.Bateman. (2014), Development of Sustainable Design Index for Office Furniture Design and Its CAD-Based Implementation. Proceeding Technical& Computer and Information in Engineering Conference IDETC/CIE 2014, August 17-20 2014, Buffalo New York USA. (6) N.Seyajah, K.Cheng &R.Bateman. (2014), Sustainable Design and Innovation for Office Furniture and Its Implementation. The 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM) May 20-23 2014, San Antonio Texas. (7) N.Seyajah, K.Cheng &R.Bateman.(2013), An Investigation On Method and Tools For Sustainable Design Of Office Furniture, 6th International Conference Design and Manufacturing for Sustainable Development (ICDMSD 2013) April 15-17 2013, pp. 27-34, Hangzhou China. (8) Minton, T., Ghani, S.,Bateman, R., Sammler, F., Fürstmann, P., & Roeder, M. (2013). Temperature of internally-cooled diamond-coated tools for dry-cutting titanium. International Journal of Machine Tools and Manufacture, 75, 27-35. (9) De Coster, R., &Bateman, R.(2012). Innovation and Knowledge Development Implications of Collaborative Networks for Product Development. International Journal of Production Research. (10) Saiful, C-G., Cheng, K., Sun, X., &Bateman, R.(2012). Optimizing heat transfer rate in an internally cooled cutting tool: FE-based design analysis and experimental study. Key Engineering Materials, 496, 188-193. (11) Ibrahim, R.,Bateman, R., Cheng, K., Wang, C., & Au, J. (2011). Design and analysis of a desktop micro-machine for vibration-assisted micromachining. P I MECH ENG B-J ENG, 225(B8), 1377-1391. doi:10.1177/2041297510393625 (12) De Coster, R.,Bateman, R., & Plant, A. (2011). Sustainable Design Strategies for Electronics Products Utilising Life Cycle Assesment. In International Conference on Production Research (ICPR). Stuttgart, Germany. (13) Sun, X.,Bateman, R., Cheng, K., & Ghani, S. C. (2011). Design and analysis of an internally cooled smart cutting tool for dry cutting. Proc. IMechE Part B: J. Engineering Manufacture, Vol. 225. (14) De Coster, R.,Bateman, R., & Plant, A. (2010), Sustainable Development Strategies for Product Provision and Manufacturing Processes", Proceedings of the 15th Cambridge International Manufacturing Symposium, 23/24th September, Cambridge University, UK. (15) Harun, K.,Bateman, R., & Cheng, K. (2010), "Modelling and characterisation of Automotive coating systems for sustainable manufacturing", Proceedings of the 8th International Conference on Manufacturing Research ICMR 2010, 14th-16th September, Durham University, UK. (16)Bateman, Rand Cheng, K., (2008), "e-Manufacture: Characteristics, applications and potential", Progress in Natural Science Vol. 18 (2008) pp1323–1328. (17)Bateman, R., (2008), "Rapid Manufacturing as a Tool for Advanced Ceramics", Ceramics Industry Report (membership confidential), CERAM core technology report No.N08C0R01. (18)Bateman, R.and Muir, R., (2008), "Novel aerosol sampling techniques for workplace health risk assessment", Inhaled Particles X conference, Sheffield, 23-25 September. (19)Bateman, R(Ed), (2007), "Proceedings of the First International Conference on Direct Writing", First International Conference on Direct Writing, Durham, April 16th-17th. (20)Bateman, R., (2007), "New Product Development Tools for the Ceramics Industries", Ceramics Industry Report (membership confidential), CERAM technology report No.EP2007/54A. (21)Bateman, Rand Cheng, K., (2006), "Rapid Manufacturing as a Tool for Agile Manufacturing: Application and Implementation Perspectives", International Journal of Agile Manufacturing, Vol. 1, No. 2, pp - . (22)Bateman, Rand Cheng, K. (2006) "Extending the Product Portfolio with ‘Devolved Manufacturing’: Methodology and Case Studies ", International Journal of Production Research, Vol. 44, No. 16, 15 August 2006, pp 3325–3343 (23) Lu, B.H.,Bateman, R.J. and Cheng, K. (2006) ‘RFID enabled manufacturing: fundamentals, methodology and applications’, Int. J. Agile Systems and Management, Vol. 1, No. 1, pp.73–92. (24)Bateman, Rand Cheng, K., (2006), "Even Closer to the Customer: Mass Customization and the Devolved Manufacturing Concept", International Journal of Mass Customisation, (25)Bateman, Rand Cheng, K., (2006), "e-Manufacture: Characteristics, applications and potential", Fifth UK e-science All Hands Meeting, 18-21 September 2006, East Midlands Conference Centre, Nottingham University, UK.. (26)Bateman, Rand Cheng, K., (2005), "e-Manufacture: thinking outside the box?", Proceedings of ISAM 2005, International Conference on Agility", 27-28 July, Helsinki University of Technology, Finland.(ISBN 951-22-7768-9). (27)Bateman, Rand Zhao, Z, X, (2004), "Parallel development: Transition from ‘e-Support’ to ‘e-Learning’", Proceedings of the 10th Annual Conference of CACSUK2004, 18 September, University of Liverpool, Liverpool, UK. (28)Bateman, Rand Cheng, K., (2004), "Internet based end-user design and e-manufacture", Advances in e-Engineering and Digital Enterprise Technology -Proceedings of Fourth International Conference on Digital Enterprise Technology", 1-3 September Leeds Metropolitan University, Leeds, UK, (ISBN 1 86058 467 5) (29)Bateman, Rand Zhao, Z, X, (2003), "Parallel development: a painless way to develop e-learning", Proceedings of the 9th Annual Conference of CACSUK2003, 20-21 September, University of Luton, Luton, UK, (ISBN: 0953389057) (30)Bateman, Rand Cheng, K., (2002), "Devolved manufacturing", International Journal of Concurrent Engineering, 10(4), 291-298, (ISSN 1063 293X) (31)Bateman, Rand Cheng, K., (2002), "Web-based distributed manufacturing and customization", Proceedings of DET 2002, 1st CIRP (UK) International Seminar on "Digital Enterprise Technology", 16-17 September University of Durham, Durham, UK (32)Bateman, R.and Cheng, K., (2001), "Devolved manufacturing", Proceedings of ICeCE 2001 International Conference on eCommerce Engineering, 16-18 September, Xi’an, P.R.China. (33) Baines, R, Colquhoun, G,Bateman, Rand Jones, N, (2001), "The benefits of using customized procedure packs", British Journal of Perioperative Nursing, 11(1), 34-39, (ISSN 147-1026) 著作 一本與英國標(biāo)準協(xié)會(BSI)合作的著作正在出版中.
|